hi all, my system configuration: P4 2,4Ghz fsb 800 HT super micro p4spa+ mainboard radeon 9200se graphics card running debian woody with kernel 2.4.21 XFree86 4.3.99-12 compiled from source
recently i bought a radeon 9200se graphics card. it took me a very long time to get it work in X. its because the ati driver only knows about the 9200 but not the 9200se. the pci-chip-id is differen (9200 = 5963 / 9200se = 5964) i found a patch on the internet that makes the driver recognize that chip. (http://www.mail-archive.com/[EMAIL PROTECTED]/msg12830.html) i recompiled XFree86 and it worked perfectly. now i want dri support too. i downloaded the radeon package (radeon-20030926-linux.i386.tar.bz2) run install.sh and everything worked great but when i run startx i get the same message as when the card wasnt detected by the driver before. [quote /var/log/XF86log.0.log] ...snip (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (EE) No devices detected. [/quote] so my question is: does the radeon dri package support the 9200se and if not is it possible to apply the above patch to make it support it? secondly is it possible to get dri support right when building XFree86 using my existing and working driver? thanks for your help m ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
