On 26 Sep 2003 22:14:59 +0200 maestro <[EMAIL PROTECTED]> wrote: > hi all, > > my system configuration: > P4 2,4Ghz fsb 800 HT > super micro p4spa+ mainboard > radeon 9200se graphics card > running debian woody with kernel 2.4.21 > XFree86 4.3.99-12 compiled from source > > recently i bought a radeon 9200se graphics card. > it took me a very long time to get it work in X. its because the ati > driver only knows about the 9200 but not the 9200se. the pci-chip-id is > differen (9200 = 5963 / 9200se = 5964) i found a patch on the internet > that makes the driver recognize that chip. > (http://www.mail-archive.com/[EMAIL PROTECTED]/msg12830.html) > i recompiled XFree86 and it worked perfectly. > > now i want dri support too. i downloaded the radeon package > (radeon-20030926-linux.i386.tar.bz2) run install.sh and everything
You need a r200 snapshot for this card. > worked great but when i run startx i get the same message as when the > card wasnt detected by the driver before. > [quote /var/log/XF86log.0.log] > ...snip > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (EE) No devices detected. > [/quote] > > > so my question is: does the radeon dri package support the 9200se and if > not is it possible to apply the above patch to make it support it? > secondly is it possible to get dri support right when building XFree86 > using my existing and working driver? > > thanks for your help > m > Felix ------------ __\|/__ ___ ___ ------------------------- Felix ___\_e -_/___/ __\___/ __\_____ You can do anything, Kühling (_____\Ä/____/ /_____/ /________) just not everything [EMAIL PROTECTED] \___/ \___/ U at the same time. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
