On Wed 2004-01-21 at 23:53 Daniel Kasak wrote:
> Subject: i810-issues-DRI
> .......
> I just upgraded to 4.3.99.902, which is the latest version of XFree86...
> I had great success to start with.
> ... after another reboot, the computer locked hard while starting X
> ........
> And then without making any further changes, X started working again,
> but with DRI disabled.
Just after installing the new X, have you performed
1) warm restart
or
2) you have switched the power off and did cold boot.
If the 1)st is true then it might be useful to examine your X installation
with an older kernel, I'd sugggest 2.4.18, i.e. install 2.4.18 as additional
kernel and boot machine with it. Then try an application using DRI.
It is not excluded that I have corresponding problem and the both, mine and
yours might be associated with a subtle behaviour of new kernels while
initiating DRI. If you suspect this may have something in common,
might I suggest you to have a look on my messages of January, 14th, 17th.
(DRI+ATI Radeon Mobility)
Regards,
Wlodek
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
--
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
