I'm trying to use a Rosewill RC-216 sata raid controller that has a
JBM363 chip on it.
The bios of the controller says the drives on it are set to "NON RAID"
but opensolaris still cannot see them.
I have two of these controller cards and have tried both, they both have
latest bios, are set to "non raid" and
I've tried multiple drives/cables.
*1. scanpci*:
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x197b device 0x2363
JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
*2. cfgadm*:
sata3/0 sata-port empty unconfigured ok
sata3/1 sata-port empty unconfigured ok
*3. cfgadm -c configure sata3/0*:
Configuration operation invalid: No device connected to ap_id:
/devices/p...@0,0/pci1002,5...@4/pci197b,2...@0:1
Question:
How do I get OpenSolaris to recognize my drives so that my precious
zpool's can be whole again?
_______________________________________________
driver-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/driver-discuss
