Add device-properties to make the bq24292i controller connected to
the bus get its input-current-limit from the fusb302 Type-C port
controller which is used on boards with the cht-wc PMIC.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
drivers/i2c/busses/Kconfig | 5 +++++
drivers/i2c/busses/i2c-cht-wc.c | 5 ++++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f20b1f84013a..6de21a81b00b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -197,6 +197,11 @@ config I2C_CHT_WC
SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
found on some Intel Cherry Trail systems.
+ Note this controller is hooked up to a TI bq24292i charger-IC,
+ combined with a FUSB302 Type-C port-controller as such it is advised
+ to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
+ (the fusb302 driver currently is in drivers/staging).
+
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
depends on PCI
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index ccf0785bcb75..08229fb12615 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -211,8 +211,11 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
.name = "cht_wc_ext_chrg_irq_chip",
};
+static const char * const bq24190_suppliers[] = { "fusb302-typec-source" };
+
static const struct property_entry bq24190_props[] = {
- PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
+ PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
+ PROPERTY_ENTRY_BOOL("input-current-limit-from-supplier"),
PROPERTY_ENTRY_BOOL("omit-battery-class"),
PROPERTY_ENTRY_BOOL("disable-reset"),
{ }
--
2.13.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
