On Sat, 3 Mar 2018 20:49:32 -0500
Brian Masney <masn...@onstation.org> wrote:
> There were three places where the same chunk of code was used to clear
> interrupts. This patch creates a common function
> tsl2x7x_clear_interrupts() to reduce duplicate code.
>
> Signed-off-by: Brian Masney <masn...@onstation.org>
Hmm. This one wasn't immediately clear to me but having looked at the datasheet
I see the logic in combining these into one function so fair enough.
The odd addresses being set as bits within a register had me confused.
Applied
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 52
> +++++++++++++++++--------------------
> 1 file changed, 24 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c
> b/drivers/staging/iio/light/tsl2x7x.c
> index b7e3f966c3a6..c02db03ef369 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -279,6 +279,20 @@ static const u8 device_channel_config[] = {
> ALSPRX2
> };
>
> +static int tsl2x7x_clear_interrupts(struct tsl2X7X_chip *chip, int reg)
> +{
> + int ret;
> +
> + ret = i2c_smbus_write_byte(chip->client,
> + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN | reg);
> + if (ret < 0)
> + dev_err(&chip->client->dev,
> + "%s: failed to clear interrupt status %x: %d\n",
> + __func__, reg, ret);
> +
> + return ret;
> +}
> +
> /**
> * tsl2x7x_get_lux() - Reads and calculates current lux value.
> * @indio_dev: pointer to IIO device
> @@ -346,16 +360,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
> buf[i] = ret;
> }
>
> - /* clear any existing interrupt status */
> - ret = i2c_smbus_write_byte(chip->client,
> - TSL2X7X_CMD_REG |
> - TSL2X7X_CMD_SPL_FN |
> - TSL2X7X_CMD_ALS_INT_CLR);
> - if (ret < 0) {
> - dev_err(&chip->client->dev,
> - "i2c_write_command failed - err = %d\n", ret);
> - goto out_unlock; /* have no data, so return failure */
> - }
> + ret = tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_ALS_INT_CLR);
> + if (ret < 0)
> + goto out_unlock;
>
> /* extract ALS/lux data */
> ch0 = le16_to_cpup((const __le16 *)&buf[0]);
> @@ -706,17 +713,10 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> "%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
> __func__);
>
> - /* Clear out any initial interrupts */
> - ret = i2c_smbus_write_byte(chip->client,
> - TSL2X7X_CMD_REG |
> - TSL2X7X_CMD_SPL_FN |
> - TSL2X7X_CMD_PROXALS_INT_CLR);
> - if (ret < 0) {
> - dev_err(&chip->client->dev,
> - "%s: Failed to clear Int status\n",
> - __func__);
> - return ret;
> - }
> + ret = tsl2x7x_clear_interrupts(chip,
> + TSL2X7X_CMD_PROXALS_INT_CLR);
> + if (ret < 0)
> + return ret;
> }
>
> return ret;
> @@ -1421,14 +1421,10 @@ static irqreturn_t tsl2x7x_event_handler(int irq,
> void *private)
> IIO_EV_DIR_EITHER),
> timestamp);
> }
> - /* Clear interrupt now that we have handled it. */
> - ret = i2c_smbus_write_byte(chip->client,
> - TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
> - TSL2X7X_CMD_PROXALS_INT_CLR);
> +
> + ret = tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_PROXALS_INT_CLR);
> if (ret < 0)
> - dev_err(&chip->client->dev,
> - "Failed to clear irq from event handler. err = %d\n",
> - ret);
> + return ret;
>
> return IRQ_HANDLED;
> }
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
