On Sat,  3 Mar 2018 20:49:34 -0500
Brian Masney <masn...@onstation.org> wrote:

> There were four places where the same chunk of code was used to write
> to the control register. This patch creates a common function
> tsl2x7x_write_control_reg() to reduce duplicate code.
> 
> The function tsl2x7x_chip_off() did not correctly return an error
> code so this patch also corrects that issue.
> 
> Signed-off-by: Brian Masney <masn...@onstation.org>
Hmm. These are getting a bit marginal in benefit but this one just makes
it over the barrier.

The reduction in complexity is really very small...

Applied.

Jonathan

> ---
>  drivers/staging/iio/light/tsl2x7x.c | 54 
> +++++++++++++++++--------------------
>  1 file changed, 25 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2x7x.c 
> b/drivers/staging/iio/light/tsl2x7x.c
> index 6bb622816660..cf16dd206c0b 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -307,6 +307,21 @@ static int tsl2x7x_read_status(struct tsl2X7X_chip *chip)
>       return ret;
>  }
>  
> +static int tsl2x7x_write_control_reg(struct tsl2X7X_chip *chip, u8 data)
> +{
> +     int ret;
> +
> +     ret = i2c_smbus_write_byte_data(chip->client,
> +                                     TSL2X7X_CMD_REG | TSL2X7X_CNTRL, data);
> +     if (ret < 0) {
> +             dev_err(&chip->client->dev,
> +                     "%s: failed to write to control register %x: %d\n",
> +                     __func__, data, ret);
> +     }
> +
> +     return ret;
> +}
> +
>  /**
>   * tsl2x7x_get_lux() - Reads and calculates current lux value.
>   * @indio_dev:       pointer to IIO device
> @@ -597,7 +612,6 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>       int i;
>       int ret = 0;
>       u8 *dev_reg;
> -     u8 utmp;
>       int als_count;
>       int als_time;
>       struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> @@ -659,14 +673,9 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>        * TSL2X7X Specific power-on / adc enable sequence
>        * Power on the device 1st.
>        */
> -     utmp = TSL2X7X_CNTL_PWR_ON;
> -     ret = i2c_smbus_write_byte_data(chip->client,
> -                                     TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
> -     if (ret < 0) {
> -             dev_err(&chip->client->dev,
> -                     "%s: failed on CNTRL reg.\n", __func__);
> +     ret = tsl2x7x_write_control_reg(chip, TSL2X7X_CNTL_PWR_ON);
> +     if (ret < 0)
>               return ret;
> -     }
>  
>       /*
>        * Use the following shadow copy for our delay before enabling ADC.
> @@ -691,16 +700,12 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>        * NOW enable the ADC
>        * initialize the desired mode of operation
>        */
> -     utmp = TSL2X7X_CNTL_PWR_ON |
> -                     TSL2X7X_CNTL_ADC_ENBL |
> -                     TSL2X7X_CNTL_PROX_DET_ENBL;
> -     ret = i2c_smbus_write_byte_data(chip->client,
> -                                     TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
> -     if (ret < 0) {
> -             dev_err(&chip->client->dev,
> -                     "%s: failed on 2nd CTRL reg.\n", __func__);
> +     ret = tsl2x7x_write_control_reg(chip,
> +                                     TSL2X7X_CNTL_PWR_ON |
> +                                     TSL2X7X_CNTL_ADC_ENBL |
> +                                     TSL2X7X_CNTL_PROX_DET_ENBL);
> +     if (ret < 0)
>               return ret;
> -     }
>  
>       chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
>  
> @@ -713,13 +718,9 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>                       reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
>  
>               reg_val |= chip->settings.interrupts_en;
> -             ret = i2c_smbus_write_byte_data(chip->client,
> -                                             TSL2X7X_CMD_REG | TSL2X7X_CNTRL,
> -                                             reg_val);
> +             ret = tsl2x7x_write_control_reg(chip, reg_val);
>               if (ret < 0)
> -                     dev_err(&chip->client->dev,
> -                             "%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
> -                             __func__);
> +                     return ret;
>  
>               ret = tsl2x7x_clear_interrupts(chip,
>                                              TSL2X7X_CMD_PROXALS_INT_CLR);
> @@ -732,16 +733,11 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>  
>  static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
>  {
> -     int ret;
>       struct tsl2X7X_chip *chip = iio_priv(indio_dev);
>  
>       /* turn device off */
>       chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
> -
> -     ret = i2c_smbus_write_byte_data(chip->client,
> -                                     TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00);
> -
> -     return ret;
> +     return tsl2x7x_write_control_reg(chip, 0x00);
>  }
>  
>  /**

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to