Hi all, Running DSpace 6 behind a load balancer on Amazon Linux 2.
I’m after some advice on how to get handles resolving – I had the handle system configured and registered a prefix with CNRI on the previous system (no load balancer). So I presume I can’t just copy the old configuration across as the IP will be different? However, if I run make-handle-config on the new system and it sets the IP as the IP of the machine, that probably won’t work either right? What is the best way to get this working behind a load balancer where the IP of the DSpace machine may potentially change? Thanks a lot, Gary Gary Browne | Technical Manager, Developments Online Services University of Sydney Library THE UNIVERSITY OF SYDNEY Level 1, Fisher Library F03, The University of Sydney NSW 2006 T +61 2 9351 5946 | M +61 405 647 868 E [email protected]<https://webmail.sydney.edu.au/owa/redir.aspx?C=OXYu29eFmlOiJviVN3CHunM5oGoASVvNNYb-H0ZnmZGiO6bY9qPUCA..&URL=mailto%3agary.browne%40sydney.edu.au> The University of Sydney Camperdown campus stands on land of the Gadigal peoples of the Eora nation. -- All messages to this mailing list should adhere to the DuraSpace Code of Conduct: https://duraspace.org/about/policies/code-of-conduct/ --- You received this message because you are subscribed to the Google Groups "DSpace Technical Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/dspace-tech/15B88238-A689-47F7-9646-E989007EC8D9%40sydney.edu.au.
