Thankyou Dan, In my experience using K95 or hyper terminal with no flow control selected or used; The busy status still prevented auto TX on send cmd as it should, esp for good fec. You mentioned Xon/Xoff and I wondered how these signals back from the transceiver relate back to a program with no flow control selected. Thanks for your previous reply and wake up call.
regards Adrian Dan Smith wrote: The radio has a very tiny buffer in it, and will send an XOFF to the computer when that buffer is full. The computer waits until the radio's BUSY sense goes off, the radio drains the buffer and the radio sends another XON to get things flowing again. It is a selectable option in the radios I've seen, but I can't imagine why you'd turn it off. -- Dan Smith
