> Under HKEY_CURRENT_USER\software\Icom\Setup there is an entry called Etc > Data. On the Vista machine on which the digital was still locked ( > because the USB cable does not work) I changed the value I found of Etc > Data from decimal value 32993 to decimal value 800. (These are not the > hexadecimal values!) I carefully remembered the first value just in > case. > > > > <http://groups.yahoo.com/group/dstar_digital;_ylc=X3oDMTJlZzkzMHJoBF9TAzk3MzU5NzE0BGdycElkAzIwNTEwNTI2BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNocGYEc3RpbWUDMTI0NTE5NjE5NA--> > > <mailto:[email protected]?subject=>
> _ Yes this registry solution was found quite a while ago ie; ¨just for your information, A D-star transceiver must be connected to the PC during the first launch of cs-2820 cloning software. If you try to start the software offline, it will not display the DV specific settings. In my special case I use a notebook to transfer the data from the transceiver to icf files and then copy it to my home PC for editing. In order to enable the DV specific settings on the home PC it was needed to modify a registry key: HKEY_CURRENT_USER Software Icom CS-2820 Setup Set EtcData to the value: 0x2d02 then start CS-2820.exe and it will show all the cells needed for DV modes. 73, DJ0ABR¨ >From Icom_IC-2820H · Icom IC-2820H yahoo group. vk4tux
