You are looking at the OLD version.
Scott
--- In [email protected], "dlake02" <dl...@...> wrote:
>
> Scott
>
> In the initial packet, the IP address is set to a 10.X.X.X/28 address. You
> won't see that in the database, because it is only sent until the Zone RP is
> authorized.
>
> Once authorized, the IP address used is the one that the Trust Server picks
> up from source IP of the poll.
>
> Also, once registered, each module registers with a 10.X.X.X/28 address so
> that DD traffic can reach it.
>
> David
>
> --- In [email protected], "ham44865" <ham44865@> wrote:
> >
> > Registrations for NEW dstar repeaters to an ICOM TRUST
> > do not have data like 10.x.x.x
> >
> > I checked about 5 NEW repeater registrations to us trust
> > and 3 to European trusts.
> >
> > No 10.x.x.x anywhere in any registration packet
> > for a NEW repeater.
> >
> > Scott
> >
> > --- In [email protected], "dlake02" <dlake@> wrote:
> > >
> > > Scott
> > >
> >
> > > If this is a registration, the IP address sent in the initial sequence
> > > should be a subnet-zero unique 10.X.X.X address with a /28 mask.
> > >
> > ...
> > ...
> > >
> > > 73 David- G4ULF
> > >
> >
>
