Do you have it set to display names instead of frequencies? Name indication type Selects name indication type from MEMORY, BANK and OFF during memory mode operation. • OFF : The programmed frequency is displayed. • MEMORY : The programmed memory name is displayed. However, the programmed frequency is displayed if no memory name is programmed. (default) • BANK : The bank name, that the selected memory channel is assigned to, is displayed. However, the programmed frequency is displayed if no bank name is programmed
From: [email protected] [mailto:[email protected]] On Behalf Of Don Russell Sent: Friday, August 21, 2009 2:02 PM To: [email protected] Subject: [DSTAR_DIGITAL] ID-800 odd "feature" My ID-800h is exhibiting a strange behavior it is applying memory channel names to the VFO and not displaying frequency. Even doing a partial, then full reset, the radio still displays memory channel names for the vfo's when reloaded. So I thought maybe the icf file was corrupt. So I did a full reset, then uploaded a completely new set of memories with the icom cs800 software. Still the same results. Anyone else seen this? -- Don Russell, CBRE W9DRR ARRL OES, Technical Specialist Winnebago County AEC http://www.socialengineer.us --
