On 01/07/2010 06:44 AM, linxdev wrote:
--- In [email protected]
<mailto:dstar_digital%40yahoogroups.com>, Adrian <vk4...@...> wrote:
ve got RMC set to on and all others set to off.
> >
> Both RMC and GGA should be on with others off.
>
That has been done but still not gps icon :(
http://www.k3dc.com/files/gps02.png <http://www.k3dc.com/files/gps02.png>
That is what I see when I switch over to my laptop. I've swapped
TX/RD. I've made sure I'm at 4800bps. Indicator is on. GPS-TX is set
to DVG. No sentences programmed. I verified port on radio is good by
programming it with the software.
Anything else I might have missed?
k3dc
.
Null modem adapter is required on RS-232C port with opc-1529r
GPS message programming
q Enter "TX GPS" in MESSAG screen.
?MENU ? MESSAG ? TX GPS
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
. TX GPS screen is displayed.
w Push [ ](MONI) to select the message edit condition.
use http://www.aprs-is.net/DPRSCalc.aspx to set message
. The 1st digit of the message blinks.
e Rotate [DIAL] to select the desired character or symbol.
r Push [](LOW) to select 2nd digit, then rotate [DIAL] to
select the desired character or code.
. Push [](LOW) to move the cursor right; push [](CS) to move
the cursor left.
. 2nd digit blinks (1st digit stops blinking).
t Repeat step r to enter the desired message.
. Up to 20-character messages can be set.
y Push [ ](MONI) to store the message.
u Push [MENU ] to return to frequency indication
vk4tux
