> On 10. May 2021, at 21:16, Johannes Hommel 
> <johannes.hom...@iws.uni-stuttgart.de> wrote:
> 
> Dear Kenza, 
> 
> what dissolution do you mean? A dissolution of CO2 into water/brine or a 
> CO2-caused dissolution of solids?
> 
> A kinetic dissolution of solid could be implemented using the 2pncmin model.
> 
> A kinetic in the dissolution of CO2 into brine/water is, to my knowledge, not 
> yet implemented in DUMUX and you would have to do it yourself by adapting the 
> 2pnc files, at least the volumevariables, maybe also the model and probably 
> the fluidsystem. You would also need an additional primary variable as the 
> CO2 in the aqueous phase would be independent of the aqueous phase, as the 
> equilibrium assumptions currently used would no longer apply. 
> 
Hi Johannes, hi Kenza,

the latter should be possible with chemical non-equilibrium model.

Best wishes
Timo


> I hope this helps a bit.
> 
> Best regards
> 
> Johannes
> 
> On 10.05.21 17:28, kenza bouznari wrote:
>> Hello Dumux users,
>> 
>> Is there a way to add a dissolution rate in the CO2 injection test?
>> 
>> Best regards,
>> 
>> Kenza
>> 
>> 
>> _______________________________________________
>> DuMux mailing list
>> DuMux@listserv.uni-stuttgart.de <mailto:DuMux@listserv.uni-stuttgart.de>
>> https://listserv.uni-stuttgart.de/mailman/listinfo/dumux 
>> <https://listserv.uni-stuttgart.de/mailman/listinfo/dumux>
> -- 
> *******************************************************
> 
> Johannes Hommel
> 
> Lehrstuhl für Hydromechanik und Hydrosystemmodellierung (LH2) Institut für 
> Wasser- und Umweltsystemmodellierung (IWS), Universität Stuttgart
> https://www.iws.uni-stuttgart.de/institut/team/Hommel/ 
> <https://www.iws.uni-stuttgart.de/institut/team/Hommel/>
> email: johannes.hom...@iws.uni-stuttgart.de 
> <mailto:johannes.hom...@iws.uni-stuttgart.de>
> Pfaffenwaldring 61
> 70569 Stuttgart
> Tel.: ++49  711 / 685-64600
> 
> Department of Hydromechanics and Modelling of Hydrosystems (LH2) Institute 
> for Modelling Hydraulic and Environmental Systems (IWS), University of 
> Stuttgart
> https://www.iws.uni-stuttgart.de/institut/team/Hommel/ 
> <https://www.iws.uni-stuttgart.de/institut/team/Hommel/>
> email: johannes.hom...@iws.uni-stuttgart.de 
> <mailto:johannes.hom...@iws.uni-stuttgart.de>
> Pfaffenwaldring 61
> 70569 Stuttgart
> Tel.: ++49  711 / 685-64600
> _______________________________________________
> DuMux mailing list
> DuMux@listserv.uni-stuttgart.de
> https://listserv.uni-stuttgart.de/mailman/listinfo/dumux

_______________________________________________
DuMux mailing list
DuMux@listserv.uni-stuttgart.de
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux

Reply via email to