On Fri, 2 Mar 2001, Mark A. Kippert wrote:
> Dave Perin on 3/2/01 9:45 AM wrote:
>
> > However, after a shut down, the drive doesn't mount. I always have to go
> > back to using Drive Setup to mount the drive... and often have to reinstall
> > the driver first. Then it mounts perfectly. After a shut down, the next
> > time I restart, it happens all over again.
> >
> > I'm not a SCSI wizard, but can normally work around such things without any
> > trouble. For those of you who ARE wizards: the drive is set at SCSI ID #2,
> > and this does not conflict with anything else on the SCSI chain. My
> > external CD Rom at SCSI ID #3 mounts just fine. Any suggestions will be
> > greatly appreciated!
> >
> > -Dave Perin
>
> Is it properly terminated?
My Dock's HD is giving me issues, too. Disk Errors. I think that the
Termination is an issue, but I am unsure of how it should be
terminated. The small terminator that ships in the dock from the factory
has me confused. Should that be removed completely? My drive doesn't even
appear in SCSI probe if I do that. Currently I have the drive plugged into
the terminator, which is plugged into the Motherboard. Doesn't make any
sense, but it is the only I have succeeded in getting it to work. (Except
it give the errors...) Should the drive itself be terminated via jumpers,
etc? Where does the internal drive fall in the chain and how does that
affect things?
Tom
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
