Y'know... I recently downloaded a bunch of tech info about this drive from
IBM's website, and this drive DOES have that capability (of setting jumpers
for autostart).  I think I'd better take the drive out and look at it.
Thanks for the tip!

Dave

> From: snetsrak <[EMAIL PROTECTED]>
> Reply-To: <[EMAIL PROTECTED]> (Duo/2400 List)
> Date: Fri, 2 Mar 2001 10:01:06 -0600
> To: <[EMAIL PROTECTED]> (Duo/2400 List)
> Subject: [Duo2400] Re: Dock HD Problem
> 
> I'm not familiar with these IBM drives, but I've had the same problem
> setting up a quantum drive in an external case.  From a cold startup the
> drive would never spin up and appear on the desktop without sending it a
> separate mount command from FWB Mounter, Drive Setup or some other
> utility.  I finally solved the problem by checking the jumper specs and
> putting a jumper over the right pins to tell the drive to spin up and get
> ready for write commands immediately when powered up, soon enough to be
> sensed by the boot drive.  (Although other seemingly identical drives
> worked fine without this jumper pin in place.?!?)
> So I'd say check with IBM to see if there's not some simple jumper
> setting that you can apply.
> 
> P.S. I've found that drives with termination problems often are like
> 'invisible', don't appear on the bus and aren't recognized by any setup
> utility.
> 
> KenK
> 
> 
> ----------
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
> 
> To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
> To switch to the DIGEST mode, E-mail to
> <[EMAIL PROTECTED]>
> Need help from a real person? Try.
> <[EMAIL PROTECTED]>
> 
> ----------
> Dr. Bott  | 10/100 Ethernet for your 2400 is finally here!
> MPC-100   | <http://www.drbott.com/prod/mpc100.html>
> 
> NineWire          | If they are cool enough to host this list...
> Digital Solutions | ...you should check them out! http://www.NineWire.com/
> 
> Midwest Mac Parts  ][  <http://www.midwestmac.com>
> After-market parts  for Macs.   ][  888-356-1104 ][
> 
> MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
> Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>



----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>

To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try.  <[EMAIL PROTECTED]>

----------
Dr. Bott  | 10/100 Ethernet for your 2400 is finally here!
MPC-100   | <http://www.drbott.com/prod/mpc100.html>

NineWire          | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/

Midwest Mac Parts  ][  <http://www.midwestmac.com>  
After-market parts  for Macs.   ][  888-356-1104 ][

MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! 
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>

Reply via email to