Duo/2400 List wrote... >Subject: [Duo2400] Re: Speculative Processing and Interware 320MHz upgrade >From: Sidney Ho <[EMAIL PROTECTED]> >Message-ID: <[EMAIL PROTECTED]> > >on 3/19/01 [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> I'm using Powerlogix Cache Profiler v1.3 in a 2400c upgraded to G3 using >> an Interware 320MHz copper processor. (I am not using Interware's >> software.) I'm not experiencing any noticeable problems but I do have a >> question. > >Ditto. This is a much better setup than Interware's software. >> >> Anyone have any info on problems relating to Spec Proc in G3-upgraded >> 2400c's? The reason I'm using PL software is to be able to turn it off if >> necessary. It can't be used in my G3-upgraded 9600 tower without causing >> trouble. > >PowerLogix recommends turning off speculative processing for any computer >not originally equipped with a G3/G4 processor. Following instructions, I >haven't been using it in the 2400, or tried, but let me know if you have any >success. I have enough stability problems with MSIE 5 on OS 8.6 to tempt >fate further. > Well, the machine did not seem to run as "smoothly" with Spec Proc on, so I've had it turned off. I've used the same logic as you re PL's recomendations for upgraded machines but ya neva know so I thought I'd ask. Thanks Sidney. PS to Walt: IMHO, Interware's software is almost as crummy as Newer's. Thanks for the good G3/G4 Strip idea. Power management is a must! Which reminds me... PPS to all: Can anyone tell me why there wasn't a battery charger made for this model? Or is there one but no one dares mention it....? Roberto ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
