----- Original Message -----
From: "Axel Neudorf" <[EMAIL PROTECTED]>
To: "Duo/2400 List" <[EMAIL PROTECTED]>
Sent: Friday, July 13, 2001 9:02 AM
Subject: [Duo2400] Re: What did I do to my Duo?
>>In addition, I'd got a 1/2-gig IDE drive to replace the 80MB SCSI. Since I
>>don't have an external floppy to use to reformat the IDE, I left both
drives
>>connected, figuring I could boot up from the SCSI, then format and copy
all
>>my system software to the IDE. According to the stuff I'd read, this
should
>>be possible (in theory) using a 2300 motherboard.
>
>Due to a lack of an IDE cable I had to use the small 240MB SCSI disk
>and can't tell if thats only possible in theory or in practise.
>Hope I could help a little.
I did this when I upgraded my 2300c from a 750 meg SCSI to a 1 gig IDE. They
both worked just fine while connected, and I was able to transfer stuff from
the old to the new. I've even considered making an external port out of the
SCSI connection so I can hook up the HDs from my other duo plus a spare I
have.
Scott Holder
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
