Jonathan, I'm not sure if you dealing with GLOD, but you might try Sydney's drill for this failure to boot:
http://webobjects.uwaterloo.ca/mac2400/power_reset_by_sydney_ho.htm >I am sure that this issue has been beaten to death on the list in >the past, but I haven't found a way to search the archives. After >putting my powerbook 2400 through the airport x-ray (it was in sleep >mode), the machine would not turn on, regardless of whether there >was a battery attached or the power adapter. I have tried >unplugging all power sources and holding in the reset button, but >nothing happens. I inserted a pc card and even with the power >plugged in, the eject buttons do not eject the card (I seem to >remember this working in the past). Is this a symptom of a bad PRAM >battery, or is there some way to force a reset of the power manager >other than holding in the reset button? Thanks in advance for any >help. > >Jonathan Clay Ralph Mawyer, Jr. San Antonio, Texas Associate Editor mac2400 ... http://www.sineware.com/mac2400 Your PowerBook 2400 Reference Site ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
