Hello: Thanks. Tried the few suggestions posted without any luck. Any other suggestions out there to resolve the problem (GLOD)?
Happy Thanksgiving In a message dated 11/16/01 1:23:15 PM, [EMAIL PROTECTED] writes: << Hello: My 2400c does not want to power up. I have a blank screen and the latch light is glowing. Under a similar scenario, I was successfully able to reset the system a few weeks ago by holding the reset button about 20 seconds when AC power was supplied. It doesn't seem to work now. I know the battery is good, and when plugged in, the power adapter and 2400 are warm, so I figure that power must be getting to the 'book. When I press the reset button I do hear a little click which I assume is a positive engagement of the reset button, but nothing happens from there - screen does not light up and now internal noise. Any ideas on what to try? ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
