----- Original Message -----
From: "Genki" <[EMAIL PROTECTED]>
To: "Duo/2400 List" <[EMAIL PROTECTED]>
Sent: Tuesday, November 20, 2001 6:02 PM
Subject: [Duo2400] Duo Dock hack update


> After looking over the list of 152 pins and ruling out as many as I could,
I
> am left with 2 pins that are likely to be the one that turns on or off the
> internal monitor and a few mor epins that are a 'maybe'  Now if only I
could
> remember where I left those DMM...
>
> What I'm, following is pin 122 (+5v EXT SENSE) and 114 (/SLOT IN) and
> without my meter I can't find out for sure if they are different between
the
> Duo Dock mainboard from the mini docks.  All I can get is on Duo Dock, pin
> 114 is grounded.  If you have a meter and you have any mini docks (floppy
> adapter, SCSI, ethernet, etc.) to check pin 114 and see if they are tied
to
> ground or not?  Also can you check for me what pin 122 is connected to on
> both Duo Dock board and the mini docks.

I have a meter and a floppy dock, and the knowledge to use them :)

What's the best pin to compare to? I haven't looked at the aforementioned
pinout sheet.

Scott Holder



----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>

To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try.  <[EMAIL PROTECTED]>

----------
Dr. Bott  | 10/100 Ethernet for your 2400 is finally here!
MPC-100   | <http://www.drbott.com/prod/mpc100.html>

NineWire          | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/

Midwest Mac Parts  ][  <http://www.midwestmac.com>  
After-market parts  for Macs.   ][  888-356-1104 ][

MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! 
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>

Reply via email to