In a message dated 9/24/03 8:17:01 AM, [EMAIL PROTECTED] writes: << There is nothing on the screen. It is bright but nothing shows up. Also I tried resetting the PRAM, but I never got a second start up sound. I also tried starting from the Disk tools disk, but got nothing there either. The floppy makes noises like it is trying to read from it, but nothing comes on the screen.>>
Hmmm...had one that did the same thing...video cable had started to slide out of the socket. Reseated the vid cable (pull keyboard, upper center of the logic is the vid cable) and it worked again. While you're in there, do check to see if the RAM card is seated. Right hand side center is the RAM card. Press fit connector. I use a piece of foam between the case and the card to make sure it doesn't come loose. <<Where is the RAM card and how to I reseat it? >> See above. Hope this helps! Andrew ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler CoolPad at Staples. Both in white for iBooks at <http://roadtools.com> Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
