Hi!
There would not normally be a voltage rating for a fuse, because they work on the amount of current passed, not the voltage. 5 amps at 1 volt is the same as 5 amps at 110 volts as far as a fuse is concerned. A fuse has a very low resistance, and works (blows) only on the basis of the differential voltage between the two ends, not the absolute voltage. I=V/R if I remember correctly.
There may of course be other considerations, such as size or rate of blow, but a voltage rating will normally only refer to the amount of insulation in the construction of the fuse, etc., which prevents arcing over to other nearby components.
Have a great New Year,
Andy
Thanks Andy.
Mad Dog
---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]>
---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html>
RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler CoolPad at Staples. Both in white for iBooks at <http://roadtools.com>
Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
