This guy had one: http://web.archive.org/web/20060102224155/http://home.socal.rr.com/midijab/ Over here, another guy mentioned he found around 11 or so: http://68kmla.org/forums/viewtopic.php?f=21&t=6122
I haven't done any fuse replacements myself. When my 2400c died, I didn't know it would have been something as simple as fuses, so I sent it off to www.dttservice.com to get repaired. If mine died again, I'd certainly do it myself. Though, I don't really have a use for my 2400c, its got more sentimental value than utility at the moment :) -Hansel On Jan 15, 2011, at 4:29 AM, Stefan Kiltz wrote: > Cheers man, > will try that, which of them fuses are likely candidates? I guess a schematic > (nah, probably not available for us merely mortals) or a picture with > locations of the fuses would support my venture greatly - any hints as to > where to look for them? > Ta > > Stefan > On 15 Jan 2011, at 02:39, Hansel Chung wrote: > >> That's possible. Usually when electrolytic capacitors are dying, they have >> some physical signs of stress or leakage. >> Take it out and take a look. >> >> Since you have multiple CPU cards, might want to fix the GLOD first? >> (typically fuses) >> >> As for the heat, it's not likely a fuse would be involved in determining if >> it runs too hot or not. >> >> -Hansel >> >> On Nov 24, 2010, at 9:53 AM, Stefan Kiltz wrote: >> >>> Hiya people at the duolist, >>> long time lurker here with a question to all techies out there. I have two >>> Comets (bog-standard PPC603e 180MHz) not working anymore. Thought I fried >>> the CPU card with the first one. The second one worked fine all the way to >>> me putting it on a shelf for a year. After re-plugging the power, all I get >>> is the dreaded GLOD, followed by a faint (sort of rattling) noise >>> originating vom the power supply daughterboard. Thanks to Ralph Mawyer, >>> who sold me one of his 603e CPU cards, I can rule out a CPU failure. >>> Since working with electronics for quite some time (not professionally >>> though), I know that capacitors, in particular the electrolyte capacitors, >>> have a tendency to dry out and losing their capacity. Could it be, that the >>> big capacitors on the power supply daughter card may have gone faulty? >>> Second question would be if any of you people sees a chance to bring my >>> NewerTech G3 upgrades back to life - back in the olden day, the first 2400 >>> was my mainstay and I paid a lot of money for that NewerTech 240MHz G3. I >>> believe it ran too hot, though not seeing any signs of excessive heat on >>> the dye/heatsink plate. Maybe some sort of SMD fuse or resistore acting as >>> one needs to be replaced? >>> I'd really love to put them Comets back into action again, ideally with the >>> G3 upgrade, which seems to be resembling gold dust these days. >>> I'd really appreciate any tips or directions where to dig deeper. >>> TaRa >>> >>> Stefan >>> _______________________________________________ >>> DuoList mailing list >>> [email protected] >>> http://listserver.themacintoshguy.com/mailman/listinfo/duolist >> >> _______________________________________________ >> DuoList mailing list >> [email protected] >> http://listserver.themacintoshguy.com/mailman/listinfo/duolist > > _______________________________________________ > DuoList mailing list > [email protected] > http://listserver.themacintoshguy.com/mailman/listinfo/duolist _______________________________________________ DuoList mailing list [email protected] http://listserver.themacintoshguy.com/mailman/listinfo/duolist
