You need the "-dao" option in the command line.
On Tue, 6 Apr 2004, Justin T Wetherell wrote: > *I am trying to burn an image file to a DVD, this is the error I get. I > can burn to a CD with the same device. I don't know if the dvdrecord > recognizes it correctly. At first it told me the file was too big, > looked like it thinks my DVD-RW is a CD-RW.* > > /"dvdrecord speed=4 dev=0,0,0 /opt/media/audio/image.img"/ > dvdrtools v0.1.3 > Portions (c) 2002 Red Hat, Inc. > Based on: > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.25 > Using libscg version 'schily-0.5' > dvdrecord: Warning: using inofficial libscg transport code version > (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69 > 02/01/18 Copyright 1997 J. Schilling'). > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD_RW ND-2500A ' > Revision : '1.06' > Device seems to be: Generic mmc2 DVD. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > dvdrecord: WARNING: Data may not fit on current disk. > dvdrecord: Notice: Most recorders cannot write CD's >= 90 minutes. > dvdrecord: Notice: Use -ignsize option to allow >= 90 minutes. > dvdrecord: Notice: Use -overburn option to write more than the official > disk capacity. > dvdrecord: Notice: Most CD-writers do overburning only on DAO mode. > > > *I then set the -overburn flag* > > /"dvdrecord speed=4 -overburn dev=0,0,0 image.img"/ > > dvdrtools v0.1.3 > Portions (c) 2002 Red Hat, Inc. > Based on: > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.25 > Using libscg version 'schily-0.5' > dvdrecord: Warning: using inofficial libscg transport code version > (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69 > 02/01/18 Copyright 1997 J. Schilling'). > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD_RW ND-2500A ' > Revision : '1.06' > Device seems to be: Generic mmc2 DVD. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > dvdrecord: WARNING: Data may not fit on current disk. > dvdrecord: Notice: Most recorders cannot write CD's >= 90 minutes. > dvdrecord: Notice: Use -ignsize option to allow >= 90 minutes. > dvdrecord: Notice: Overburning active. Trying to write more than the > official disk capacity. > Starting to write CD/DVD at speed 4 in write mode for single session. > Last chance to quit, starting real write in 0 seconds. Operation starts. > Track 01: Total bytes read/written: 4311220224/4311220224 (2105088 > sectors). > dvdrecord: Input/output error. close track/session: scsi sendcmd: no error > CDB: 5B 00 02 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in > session) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 480s > cmd finished after 0.000s timeout 480s > > *I finally got it to work, kinda.... Now it seemed to burn well but I > cant mount the disc* > > dvdrecord -vv -eject -dao -dummy -overburn dev=0,0,0 > /opt/media/movies/Willy_Wonka_and_the_Chocolate_Factory.avi > dvdrtools v0.1.3 > Portions (c) 2002 Red Hat, Inc. > Based on: > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > TOC Type: 1 = CD-ROM > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.25 > Using libscg version 'schily-0.5' > Using libscg transport code version > 'schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL' > dvdrecord: Warning: using inofficial libscg transport code version > (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69 > 02/01/18 Copyright 1997 J. Schilling'). > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD_RW ND-2500A ' > Revision : '1.06' > Device seems to be: Generic mmc2 DVD. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > Drive buf size : 1769472 = 1728 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 694 MB > track: 1 start: 0 pregap: 150 > Total size: 797 MB (79:01.48) = 355611 sectors > Lout start: 797 MB (79:03/36) = 355611 sectors > 41 00 00 14 00 00 00 00 > 41 01 00 10 00 00 00 00 > 41 01 01 10 00 00 02 00 > 41 AA 01 14 00 4F 03 24 > Track 1 start 0 > Track 2 start 355611 > 41 00 A0 00 00 00 00 01 00 00 00 00 > 41 00 A1 00 00 00 00 01 00 00 00 00 > 41 00 A2 00 00 00 00 79 03 36 00 00 > 41 00 01 00 00 00 00 00 02 00 00 00 > Current Secsize: 2048 > ATIP start of lead in: -150 (00:00/00) > ATIP start of lead out: 157789 (35:05/64) > Disk type: unknown > Manuf. index: -1 > Manufacturer: unknown (not in table) > Blocks total: 157789 Blocks current: 157789 Blocks remaining: -197822 > dvdrecord: WARNING: Data may not fit on current disk. > dvdrecord: Notice: Overburning active. Trying to write more than the > official disk capacity. > Starting to write CD/DVD at speed 4 in dummy mode for single session. > Last chance to quit, starting dummy write in 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > BURN-Free is ON. > Sending CUE sheet... > 41 00 00 14 00 00 00 00 > 41 01 00 10 00 00 00 00 > 41 01 01 10 00 00 02 00 > 41 AA 01 14 00 4F 03 24 > dvdrecord: WARNING: Drive returns wrong startsec (0) using -150 > Writing pregap for track 1 at -150 > dvdrecord: Input/output error. write_g1: scsi sendcmd: no error > CDB: 2A 00 FF FF FF 6A 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 200s > write track pad data: error after 0 bytes > BFree: 0 K BSize: 1728 K > Starting new track at sector: 0 > Track 01: 694 of 694 MB written (fifo 100%). > Track 01: Total bytes read/written: 728291328/728291328 (355611 sectors). > Writing time: 221.752s > Fixating... > WARNING: Some drives don't like fixation in dummy mode. > Fixating time: 0.496s > dvdrecord: fifo had 11472 puts and 11472 gets. > dvdrecord: fifo was 0 times empty and 7003 times full, min fill was 90%. > > *Anyone have any suggestions?* > > > > _______________________________________________ > Dvdrtools-users mailing list > [EMAIL PROTECTED] > http://mail.nongnu.org/mailman/listinfo/dvdrtools-users > _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
