Strangely enough, the following appears to work:
cat dvdimage.iso | dvdrecord -vv -dummy -dao -eject -
without -tsize
Kevin wrote:
Thus far, i cannot get this drive (LiteOn SOHW 1633S) to burn any DVDs using either dvdrecord (v0.2.1) or cdrecord patched (burning CDs actually works fine).
I'm running Slackware 9.0. I have used dvdrecord successfully on this machine before but with a Pioneer DVD-R unit. I have bumped up the firmware on the LiteOn from BSOH to the latest BSOS, but that didn't change anything. I am using Memorex DVD+R media.
Command: dvdrecord dev=0,0,0 -dao ./test.raw
The end result: dvdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 1D BF 36 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
I have tried burning different image files and burning at different speeds (1x and 4x) all with the same results.
Any help or ideas would be GREATLY appreciated. /KRM
_______________________________________________
Dvdrtools-users mailing list
Dvdrtools-users@nongnu.org
http://lists.nongnu.org/mailman/listinfo/dvdrtools-users
_______________________________________________ Dvdrtools-users mailing list Dvdrtools-users@nongnu.org http://lists.nongnu.org/mailman/listinfo/dvdrtools-users
