definitely a bug   

thjere are 3 wires  a red, white and what i presume to be 
ground

the gound goes to the post that is connected to the base  
do i just twist the rd and white together and attach to ther 
post that is connected to the strap?

This is the problem I have.  i can figure out most of the 
adjustments but not this

Steve


On 19 May 2008 at 13:05, Les Kalmus wrote:

> Steve,
> 
> If this is a bug, you need only one wire and ground.
> The one wire goes to the tip of a standard phone plug and the ground 
> goes to the outside of the plug.
> If this is a paddle, you need a stereo plug. The dit lever goes to the 
> tip and dah lever goes to the ring. Ground goes to the shell.
> 
> I used to use a bug and then went to a paddle with iambic keying. You 
> (I) can't go home again.
> 
> Les
> 
> Steve Adell - KF2TI wrote:
> > I aquired my first vibroplex original key, circa 
> > 1963 at the Dayton Hamfest
> >
> > I have made the necessary adjustments and 
> > am now prepared to wire it up
> >
> > I have an old stereo headphone wire (2 wires 
> > and a ground but have no clue as to which post 
> > which wire goes to
> >
> > any help would be appreciated
> >
> > also, has anyone ever used a pair of paddles 
> > that were wired backward, learning code that 
> > way and then gone to a bug??  Was it hard to 
> > relearn to send with thumb giving dits?
> >
> > Thanks
> >
> > Steve A
> >
> >
> >
> > Subscribe/unsubscribe, feedback, FAQ, problems 
> > http://njdxa.org/dx-chat
> >
> > To post a message, DX related items only, [email protected]
> >
> > This is the DX-CHAT reflector sponsored by the NJDXA 
> > http://njdxa.org
> >
> >
> >   
> 
> 
> Subscribe/unsubscribe, feedback, FAQ, problems 
> http://njdxa.org/dx-chat
> 
> To post a message, DX related items only, [email protected]
> 
> This is the DX-CHAT reflector sponsored by the NJDXA 
> http://njdxa.org
> 
> 





Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat

To post a message, DX related items only, [email protected]

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org

Reply via email to