I have been using an old SoundBlaster 16 for years and don't have a problem with PSK31...maybe a setup issue with having the two cards installed and interaction between them? Just a thought but I don't think it's the card. Mine has to be at least 3 if not four years old in my shack computer. 73, Todd WM8C's Ham Links http://www.qsl.net/wm8c All outgoing emails and attachments are scanned with Norton 2002
----- Original Message ----- From: "GW4BLE" <[EMAIL PROTECTED]> To: "DX4WIN" <[email protected]> Sent: Saturday, August 03, 2002 6:21 PM Subject: [Dx4win] SB16 Soundcard & PSK31 Error > Hello, > > Having now successfully (?) installed a second soundcard (I now have an old > ISA SoundBlaster16) I have an error message when trying to run PSK31 which > says - "card doesn't support 16 bit 8000Hz mono format". > > Why should this be? The SB16 works fine for voice keying (i.e. with > Writelog and a RIGblaster) but why the apparent problem with DX4WIN & PSK31? > > Oh, if anyone is interested, the trick to get the two soundcards installed > correctly under Windows was to FULLY remove the original soundcard (by that > I mean, remove *all* the software drivers and physically remove the card), > then install the ISA card (SB16) manually (not PnP) plus software followed > by the PCI card (mine is a Yamaha DX-SG). Sounds easy just saying it like > that - took a while to figure out the correct sequence of doing things > though! > > Anyway, any SB16 users that can advise on the PSK31 error ? > > 73 > > > Steve > > GW4BLE > > Contest Cambria - GW7X (http://www.gw7x.org) > > > 01442 297738 > 07710 055612 > > > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > >
