This is what I use for my cards. I have set up Custom2 label format as follows:
Label Width: 119.99 Label Height:35.50 Nr across:1 Nr down:1 Horiz Pitch:119.10 Vert Pitch:32.99 Paper siz: custom Spacing left:19.99 Spacing top:45.01 Page width:140 page height:80 Horiz shift:0.00 Vert shift:0.00 Max QSOs:0 Portrait:(checked) Callsign Font:Andale Mono Body Font:Andale Mono Options: Comercial:9checked) Use lines:(unchecked) Call right aligned:(unchecked) This was posted to the reflector some time ago by one of our friends. I do not take credit for that. They can be adjusted to fit your cards. However, I designed my own format without the boxes. This allows Dx4Win to print several QSO's on one card. Thus the Max QSOs is set to 0 to allow the program to do this. If you only want 1 QSO per card, set this to 1. At 10:08 1/27/02 -0500, Ed Himwich N3HXQ wrote: >I am interested in printing directly on QSL cards to avoid the use of labels >as much as possible. I have looked a bit at the help file, but haven't found >anything that indicates how this might be done. My best guess is that it >would be a custom label, but I don't see anyway to arrange the information >so that it will appear in the correct locations to match the boxes on QSL >cards. > >Another issue is that it there would need to be a way to suppress the >printing of addresses for direct QSL cards so that they aren't printed onto >cards. However, it would still be good to print the address labels, maybe >there could be an option to print just the QSLs that have addresses on label >stock. The printed QSL labels could be used to match the address labels to >the cards. > >Last, but not least: Is there a way to start printing in the middle of a >partially used sheet of labels? > >73, Ed N3HXQ > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win Jim Rhodes K0XU [EMAIL PROTECTED]
