I disagree! My Kenwood TS940 is put into split mode any time the qsx freq is included with the spot and is selected. The only thing I have had to get used to was making the correct selection when listening. If I simply right click on a spot and select listen, then the radio goes instead to the spot that was highlighted. I have to left click first to highlight the spot I want and then right click to listen. If it is a split operation and is spotted properly with a freq in the QSX window, the radio works correctly and comes up in split mode as it should. If this is confusing to you don't be alarmed. I just got confused myself trying to explain it! :)
J Sartain KC4ALG [EMAIL PROTECTED] http://www.heartoftn.net/users/jsartain/KC4ALG.htm ----- Original Message ----- From: "Dean M. St. Hill" <[EMAIL PROTECTED]> To: "Mike Rhodes" <[EMAIL PROTECTED]>; <[email protected]> Sent: Monday, March 25, 2002 10:26 AM Subject: Re: [Dx4win] QSX Function of TS-850S > I have used several Kenwoods with varius logging programmes and this is how > it is implemented. The software puts the frequencies into the two VFO's and > then you have to manually place the rig into split with the appropriate > button depending on the specific transceiver. > > There is simply no command available (at least up to the TS-850) for putting > the rig into split mode. > > > 73, and have fun. > > Dean - 8P6SH > ----- Original Message ----- > From: "Mike Rhodes" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, March 25, 2002 11:26 AM > Subject: Re: [Dx4win] QSX Function of TS-850S > > > > Tim, > > My 850 behaves the same but this is the only radio-enabled logging > program > > I have used since I bought the rig so I assumed it is the typical > response. > > The QSX frerquency is loaded but you have to hit the 'TX-B' button to get > > into split mode. > > > > Mike / W8DN > > DX4Win Since Ver 0.97 > > > > ----- Original Message ----- > > From: "Timothy Coker" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Sunday, March 24, 2002 11:11 PM > > Subject: [Dx4win] QSX Function of TS-850S > > > > > > Hi, I cannot seem to get my TS-850S to QSX properly with spots. My radio > > would do it no problem using Log Windows when I used to use their software > > so I know my cable's pins should be configured properly. I can QSY with > > correct mode to a spot without problem, but no matter the method of > listing > > QSX/up or whatever on a spot it will not work. I am using the Kenwood > > 850-950 setting. Here is what happens... I double click with mouse on a > spot > > that has Up 'x' or QSX frequency listed, my radio QSY's there, the radio > is > > actually setup properly for QSX frequency (RX VFO A, TX VFO B) but then is > > immediately switched back to RX/TX on VFO A. It will not stay on split VFO > > operation. I've played with the different options in DX4WIN and have > looked > > through the user manual, any suggestions please? > > > > Timothy Coker - N6WIN > > Private Pilot - Instrument > > > > > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > [Virus scanned by SunBeach - http://www.sunbeach.net] > > > > > > > > > [Virus scanned by SunBeach - http://www.sunbeach.net] > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win
