Floyd, Good work! In the next release you will be able to switch between the two radios with a few keystrokes.
Don't ask me 'when'; still working on this! Paul At 08:14 PM 11/23/02 -0500, Floyd Sense wrote: >I recently had this question: With an Icom 765, when I mouse on a CW DX >spot, the wide filter is automatically selected. I wanted the narrow >filter to be selected in this case, so the question was: How to do that? >Here's how I accomplished it with the Icom 765. > >1. In the DX4WIN/SAVE directory, I found the file called Icom 765.rig and >renamed it "Icom 765CWWide.rig" and made a copy and named it "Icom >765CWNarrow.rig". > >2. From the DX4WIN File menu, I went to Databases / Radios and selected >"Icom 765CWWide" as the Radio model. This was just to make sure that >everything still worked after the name change. Note that after editing the >radio information, DX4WIN disables the Radio communications and you'll have >to go to File / Preferences / Radio and specify the Type. I used "Icom >765CWWide" here. After this, the wide filter was selected on CW spots just >as before. > >3. I then went to File / Datebases / Radios and selected "Icom 765CWNarrow" >as my Radio model. Next, I went to the Cmds/Fields tab and selected the Set >Mode command from the pull-down list. The command string that appears just >below is: 0600FD. I changed that to 060002FD. The "02" causes the narrow >filter to be selected. I then saved the change by File / Save Changes and >Exit. > >4. At this point, I had to go back to File / Preferences again and set the >radio model to "Icom 765CWNarrow". After DX4WIN was again communicating >with the 765, mousing on a CW DX spot caused the narrow CW filter to be >selected. If I want to go back to having the wide filter selected, I just >change the radio model to "Icom 765CWWide". > >I strongly suggest you make a backup copy of the .rig file you're dealing >with before making changes via the editor. > >K8AC >Floyd Sense in Angier, NC > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
