For the RAC lookup... Right click on the window and check "Automatic Update" ...
He knows about the QSL manager date problem The 3 digit reports are to accommodate modes other than SSB... But I agree about making a preference on this... I've asked Paul the same thing... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stefano Cipriani Sent: February 9, 2003 9:11 AM To: KK4HD Paul (dx4win); dx4win/reflector Cc: NR4M Steve (dx4win) Subject: [Dx4win] Vers. 6.02 Hi Paul, Can You modify the V.603 to fix these problems? >- 1st - Just installed V.602 and migrated ".INI" file from my V.503. On it there are a couple of labeled items about the "custom 1 and 2" label definitions, as you can see: [CustLab1] LabelID=3DCustom1 Metric=3D1 SpacingTop=3D0.039 SpacingLeft=3D0.039 SpacingHeight=3D1.169 SpacingWidth=3D2.756 LabelHeight=3D1.091 LabelWidth=3D2.717 RightShift=3D0.000 DownShift=3D0.000 PageWidth=3D8.268 PageHeight=3D12.028 NumAcross=3D3 NumDown=3D10 PaperName=3DCustom Portrait=3D1 [CustLab2] LabelID=3DCustom2 Metric=3D1 SpacingTop=3D0.787 SpacingLeft=3D0.315 SpacingHeight=3D3.189 SpacingWidth=3D3.327 LabelHeight=3D3.110 LabelWidth=3D3.307 RightShift=3D0.000 DownShift=3D0.000 PageWidth=3D4.134 PageHeight=3D5.315 NumAcross=3D1 NumDown=3D1 PaperName=3DCustom Portrait=3D1 After merging the .ini file, all the "custom" label fields are setting to "zero", and I must insert all the custom label definitions manually. I already made You aware of this problem also on V.503 >- 2nd - Editing Custom Labels: The "MaxQSO" size field is common to both custom1 and custom2 labels record. Changing the custom1 label value You change also the custom2 label value and viceversa. But I need to set the Custom1 to 3 max qso, and the Custom2 to max 10 qso or more (printing directly on the card). I'm very disappointed to change this datum all the time when I change label size! I already made You aware of this problem also on V.503 >- 3rd - Accessing to R.A.C.: When I press F3 to read the RAC info, I can read the data correctly. But switching to other qso, the RAC window rest inactive, showing the previus data. I must press F3 any time I want a new info. (Very tedious!!) On V.503 it runs well, showing itself a new info on any new qso selected. >- 4th - In V.602 the SSB reports changed to 3 digits - I am not happy about it. I have never used 3 and I wish there was a small radio button in preferences that allowed me to pick either 2 or 3 digits. Better yet the 3rd digit of the report could be listed under DISABLED FIELDS!! (requested also by tonno/es5tv). >- 5th - Manager database: After an importing qsl manager file (.txt), I found wrong dates on its database!! Urgent to fix!!!!!!! >- 6th - Filter selection: As qsl manager I appreciate very much the dx4win facility to load several logs on the same file, selecting each time the one to up to date. Unfortunately sometimes (adding, merging or importing new qsos) I have a mishop, because I forget to change the "PREFERENCE|QSO|GROUP|#" after making the "QSO|FILTER|SELECTION" of the specified log group (for instance the #5). The result is that all qsos I want added on the selected log #5 are added on the log #1 (as predisposed on "FILE|PREFERENCES|QSO|GROUP|#"), with hard problems to restore the right situation (re-install the backup file and repeat the qso adding). I should like that the "QSO|GROUP|#" in the "QSO" window have an automatic change, according to the "QSO|FILTER|SELECTION" activated. In fact, if I select a specified group, I want to work on it only!!! Why not improve an automatic "QSO|GROUP|#" change, in presence of the "QSO|FILTER|SELECTION" switched NOT ZERO? In short, I should like the "QSO|GROUP" will be fixed: - equal to "PREFERENCE|DEFAULT FOR NEW QSO|GROUP" if the "FILTER|SELECTION" is not activated (set to zero). - equal to "FILTER|SELECTION|#" if the "FILTER|SELECTION" is activated (not zero). Only few lines of code needed, I think, as: """""""""""""""""""" IF ["QSO|FILTER|SELECTION"] =3D=3D 0 ["QSO|GROUP|#"] =3D=3D ["FILE|PREFERENCES|QSO|GROUP|#"] ELSE ["QSO|GROUP|#"] =3D=3D ["QSO|FILTER|SELECTION|#"] ENDIF """""""""""""""""""" I already made You aware of this problem also on V.503 >- 7th - When importing QSL Managers or Managers' Addresses would like to see which entries were changed!! Not just Replaced 55 and Added 32. There could be messages the same way as when merging CTY files! (Maybe I need to restore some data!!) (requested also by tonno/es5tv). That is all for the moment..... I'm testing.... I hope it is of help! Ciao Steve Stefano Cipriani / I=D8MWI http://www.qsl.net/i0mwi e-mail: [EMAIL PROTECTED] ----------------------------------------- " In and outgoing mail scanned with NAV 2002" _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
