Hi Jim, You don't need Direct I/O for DX4WIN all drivers are included, I now writelog doesn't support W2K and XP LPT drivers and with Direct I/O you have a work around. If you don't start these driver I'm sure that DX4WIN will be working correct.
About your dx-doubler check his hardware page , there is hardware error that can be fixed with modifying your doubler. 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm MY SALESPAGE with radioamateur & computer parts http://www.on4aoi.be/sale.htm ----- Original Message ----- From: "James R. Kauten, MD, W4TE" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, February 22, 2003 10:08 PM Subject: [Dx4win] Using LPT1 with DX4WIN and Win2000 > Does anyone have the LPT port working with DX4WIN v6.02 and Windows 2000? > > I use Direct I/O (http://www.direct-io.com/index.htm?http&&&www.direct-io.com/kb/q600003.htm) to use the LPT port when using WriteLog for contesting (OS-Windows 2000). It will appropriately switch between 2 radios using the Top Ten Devices "DX Doubler" box and keys the appropriate radio when using CW. > > I have set up Direct I/O to use with DX4WIN v6.02 but have not been able to get it to key CW or switch the DX Doubler box as it will with WriteLog. > > I receive the following error messages: > > "Cannot find LPT1 for Radio 1/2 Switch" and > > "Cannot find LPT1 for Keying" > > Any help would be appreciated. > > > 73, > Jim Kauten, MD, W4TE > > > ******************************************** > > James R. Kauten, MD, W4TE > > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > DXCC > ARRL Life Member > AMSAT Life Member > INDEXA Life Member > Southeastern DX Club President (SEDXC) > South East Contest Club Member (SECC) > Buckhead Contest Club Life Member > Northern California DX Foundation Member (NCDXF) > > ******************************************** > > This email was powered by MDaemon and scanned by AntiVirus Plug-in for MDaemon. > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in HTML > or had an attachment. Attachments are not allowed. To learn how > to post in Plain-Text go to: http://www.expita.com/nomime.html --- > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > >
