Anyone using an Icom-746 with DX4WIN out there? What address are you using in your radio setup parameters?
Dx4WIN can read my 746 only after booting up and manually starting the radio. When I start DX4WIN I get this pop up window? Radio Timed Out, then interface disabled and an exception occurred. 0050fa74. adr fffffffff Like I mentioned above, DX4WIN reads the radio just fine after I have it going but I need to start the radio manually and then go into real time logging. Here are my set-up parameters: Radio 746 address is 56 baud is 9600 com 1 poll 1000 max tries 6 Also the windows for the radio, com port and cw keyer are NOT filing in with the information. They are blank. Nothing in them but when checking them the correct info is shaded blue. Nothing else is on com 1 and there are no conflicts. I know this is not right because I have DX4WIN running on my other computer with my TEN TEC Omni VI+ and it is fine. So I believe DX4WIN is looking for another address for the IC-746 or different info then I have supplied. 73--Wayne N2WK
