Mine are the same as yours exceept for poll is 5000 and I have a different COM port.
You haven't altered the address away from 56 on your radio have you? Good luck Bill ----- Original Message ----- From: "Wayne F. King" <[EMAIL PROTECTED]> To: "dx4win" <[email protected]> Sent: Friday, January 10, 2003 10:41 AM Subject: [Dx4win] DX4WIN with IC-746 > Anyone using an Icom-746 with DX4WIN out there? > > What address are you using in your radio setup parameters? > > Dx4WIN can read my 746 only after booting up and manually starting the > radio. When I start DX4WIN I get this pop up window? > Radio Timed Out, then interface disabled and an exception occurred. > 0050fa74. adr fffffffff > > Like I mentioned above, DX4WIN reads the radio just fine after I have it > going but I need to start the radio manually and then go into real time > logging. > > Here are my set-up parameters: > > Radio 746 address is 56 baud is 9600 > com 1 poll 1000 max tries 6 > > Also the windows for the radio, com port and cw keyer are NOT filing in > with the information. They are blank. Nothing in them but when checking > them the correct info is shaded blue. Nothing else is on com 1 and there > are no conflicts. > > I know this is not right because I have DX4WIN running on my other > computer with my TEN TEC Omni VI+ and it is fine. So I believe DX4WIN is > looking for another address for the IC-746 or different info then I > have supplied. > > 73--Wayne N2WK > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
