What cable you are using ? You need a nullmodem cable for the ft1000 73 marc on4ma ----- Original Message ----- From: "Bob Applegate" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, October 16, 2003 4:03 PM Subject: [Dx4win] FT-1000 Field as 2nd radio
> Last night I connect a 1000 Field as a second radio with DX4WIN 6.02. The > first > radio (TS-850) works fine, but DX4WIN doesn't seem to find the 1000. > > I did switch to the 2nd radio. The CAT portion of the 1000 display turns on > and off; > is it supposed to do that, or should it remain on? Clearly, the 1000 is > seeing data from > the computer. After a while, DX4WIN says the radio timed out. > > I also replaced every cable between the computer and radio, and tried two > different > serial ports; exactly the same results. The ports were both from a PCI > 4-port > serial card, not standard COM1 nor COM2. Other ports on the same card do > work > with other software packages, so I'm assuming the serial ports are okay. > > Am I missing some setup option in the 1000 or DX4WIN? > > 73 > > Bob - K2UT > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > >
