He has the Field - should be same as FT-1000MP etc - shouldn't need a null cable.
----- Original Message ----- From: "ON4MA Marc" <[EMAIL PROTECTED]> To: "Bob Applegate" <[EMAIL PROTECTED]>; <[email protected]> Sent: Saturday, October 18, 2003 3:44 AM Subject: Re: [Dx4win] FT-1000 Field as 2nd radio > What cable you are using ? > You need a nullmodem cable for the ft1000 > 73 > marc on4ma > ----- Original Message ----- > From: "Bob Applegate" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, October 16, 2003 4:03 PM > Subject: [Dx4win] FT-1000 Field as 2nd radio > > > > Last night I connect a 1000 Field as a second radio with DX4WIN 6.02. The > > first > > radio (TS-850) works fine, but DX4WIN doesn't seem to find the 1000. > > > > I did switch to the 2nd radio. The CAT portion of the 1000 display turns > on > > and off; > > is it supposed to do that, or should it remain on? Clearly, the 1000 is > > seeing data from > > the computer. After a while, DX4WIN says the radio timed out. > > > > I also replaced every cable between the computer and radio, and tried two > > different > > serial ports; exactly the same results. The ports were both from a PCI > > 4-port > > serial card, not standard COM1 nor COM2. Other ports on the same card do > > work > > with other software packages, so I'm assuming the serial ports are okay. > > > > Am I missing some setup option in the 1000 or DX4WIN? > > > > 73 > > > > Bob - K2UT > > > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win
