Dear Larry, I had a similar problem with lack of serial ports, I brought a USB adaptor for about $100, which gave me 4 additional serial ports. The adaptor came from the states and if that solution appeals to you I'll send you manufacturers tel number. I am at work now and the info is at home.
I am sure you have considered this solution, however, it=92s a shame it does not work for you as it did in DX4WIN earlier version. Kind Regards =A0 =A0 Tony Lord G8DQZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier (K8UT) Sent: 26 October 2003 11:26 To: [email protected] Subject: [Dx4win] PSK31 support for LPT keying Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This works fine for CW, but when operating in PSK31 mode, the LPT keyed line does not seem to operate. I have gone into the PSK Tx preference window and checked the "use CW control" - but the LPT CW line does not work from PSK. (the frustrating fact is that PSK keying _does_ work under exactly the same settings from the COM port - but my com ports are dedicated to other functions). Am I doing something wrong here ? -larry K8UT _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
