Larry, I've been trying to sort this one out for ages, cannot find a solution (other than to use an old comp running W95), if you get a solution, please let me know!!
I have tried here in this reflector to get an answer, but to no avail. As you say XP tries to help but for ham applications/hardware, it isn't any help at all. For the record I am trying to connect ARSWIN and antanna controller to two parallel ports. With NO success, only LPT1 works. No help to you I know, but maybe someone will find a solution?? 73's and good luck Tony G8DQZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier (K8UT) Sent: 16 December 2004 12:26 To: [email protected] Subject: [Dx4win] Multiple parallel ports with DX4WIN and WindowsXP I have three auxilliary devices (TopTen Devices antenna switch, ARSWin antenna rotor control, WaveNode remote wattmeter) that connect to my computer via a parallel port. Two of them (TopTen and ARSWin) are controlled via settings in DX4WIN. The computer is a recent model Dell running Windows XP sp2. Unfortunately, DX4WIN ( or the control software that came with these 3 devices ) only functions when the controlled device is connected to LPT1 - the built-in motherboard LPT in the Dell. So -- ALL three devices/software work when I define them as being on LPT1; but NONE of them work when configured for either LPT ports #2 or #3. I have purchased two PCI parallel port cards - the Byte Runner (dual serial, single parallel) and the NetMOS single parallel. I have spent countless hours trying to get these additional parallel ports to resemble "legacy" parallel ports, with selectable memory addresses. Unfortunately, Windows XP wants to "help" by intervening with its virtual port addressing... which is what seems to be defeating the software in DX4WIN, ARSWin and WaveNode. My diagnosis is that although the Windows Device Manager reports that these extra ports are on LPT2 or LPT3, they are not at the expected direct memory addresses that the vendors' software expects. If anyone has successfully installed multiple parallel cards under Windows XP, and managed to get DX4WIN (or other software) to connect to those ports, I would love to hear from you. -larry K8UT _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
