Gary et.al. I forgot to put the forward slash in the URL.
Here is the actual value I am using =3D> www.qrz.com/ Be sure that the forward slash is there. Sorry, I should have copied the entry rather than duplicating it from memory. Tod, K=D8TO =20 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] = On Behalf Of Garry Shapiro Sent: Monday, February 16, 2004 11:31 PM To: DX4WIN Reflector Subject: RE: [Dx4win] EXT DATA -- from QRZ.com on line That is not working for me in 6.02. When I hit [ENTER}, it tries to = open the QRZ.com site, but flashes through it to a "Cannot display" screen. = The reason for this becomes apparent---the URL entered in the IE address bar = is www.qrz.com, but with the DX callsign appended to the ".com"! Would someone like to take a crack at explaining that? Garry, NI6T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Tod - ID Sent: Monday, February 16, 2004 9:50 PM To: 'DX4Win' Subject: RE: [Dx4win] EXT DATA -- from QRZ.com on line I wish to thank Chaz Cone for supplying the "magic" that allowed me to = use the QRZ.COM web access mentioned in the Version 6.0 manual. The secret is to put the QRZ.COM URL (www.qrz.com) in both the Call sign lookup address and the QSL lookup address sub windows of the EXT DATA window. Then when one places the cursor on the Call in the regular QSO window and presses the [F3]key a blank window appears with call sign in = the lower left corner. Now hit the [ENTER] key and the QRZ screen will = appear. Overall it is not as "slick" as pulling up the information from a CD = that has been stored on one's hard drive, but it does work. Tod, K=D8TO _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
