Same thing here with my 756. I set DX4WIN up for the 756Pro instead and all is OK. Evidentially, the program thinks that the 756 does not have 6M.
John DeRuiter, WM7A http://members.cox.net/wm7a/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Don Sent: Saturday, July 03, 2004 1:29 PM To: DX4WIN Subject: [Dx4win] Freq. Selection on 6 meters Hi to all, For some time now I have noticed that when I click on a spot in the spot by time window that I get a bad freq. message from DX4WIN. I am running a Icom 756. This only happens when operating on 6 meters. When selecting a spot on any other band all is OK. When operating on 6 meters I also notice that the correct freq. is recorded in the Notes for this QSO. The program seems to read the right freq. from the radio but does not accept as a good freq, therefore it does not change the freq. on the radio. Anybody had this experience or have a few words of wisdom? 73...Don...W4TO _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
