You need to edit the Radio information that shows what the highest frequency available is. To do this, go to File->Databases->Radio, and in the Edit Radio screen (it should be the one you're using), change the high frequency as appropriate. (Mine says 52,600 Khz). Remember to save changes, and you should be all set.
At 05:13 PM 7/3/2004, Eric Lowell wrote: >I don't have DX4WIN running on this computer, but it seems like I remember >setting my access to expert in preferences and then modifying the radio file >to solve this for my TS570. > >Good luck, Eric (W1EL) >----- Original Message ----- >From: "Don" <[EMAIL PROTECTED]> >To: "DX4WIN" <[email protected]> >Sent: Saturday, July 03, 2004 4:28 PM >Subject: [Dx4win] Freq. Selection on 6 meters > > > > Hi to all, > > For some time now I have noticed that when I click on a spot in the spot >by > > time window that I get a bad freq. message from DX4WIN. I am running a >Icom > > 756. This only happens when operating on 6 meters. When selecting a spot >on > > any other band all is OK. When operating on 6 meters I also notice that >the > > correct freq. is recorded in the Notes for this QSO. The program seems to > > read the right freq. from the radio but does not accept as a good freq, > > therefore it does not change the freq. on the radio. Anybody had this > > experience or have a few words of wisdom? > > > > 73...Don...W4TO > > > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win 73, David - K2DBK
