I have my Yaesu FT-1000MP MKV and DX4win set up the same way; however, I'm using a USB to RS232 adapter. Everything works fine but slow. When I did use the one (1) com port I do have on my computer instead of the adapter response was much, much faster.
73, John, KC9JS Twin Lakes, Wisconsin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ted Sarah - W8TTS Sent: Wednesday, November 24, 2004 5:33 AM To: Wanda_Jak Cc: Dx4win@mailman.qth.net Subject: Re: [Dx4win] DX4Win and FT1000MP Hi Wanda, Mine is setup like this... Type: Yaesu FT1000MP Address: 00 Baudrate: 4800 Both default boxes are checked COM Port: COM1 Poll rate: 500 ms MAX: 5 DTR High is checked RTS High is NOT checked Hope this helps. 73 - Ted - W8TTS Wanda_Jak wrote: > Hello, > I am just configuring my DX4Win software to connect to the radio and TNC > modem. Could someone tell me which parameters should be used in a case of > FT1000MP? > I know the baud rate should be 4800, and the COM field is also correct. > However, the radio does not work. What about the 'address" field at > 'File/preferences/radio'? > Hopre for your help. > yl Wanda SP7IWA > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > ---------------------------------------------------- > This message has been processed by Firetrust Benign. > _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win