Has anyone set up rigblaster and ver 7 of dx4win? Having difficult time getting psk and mtty to run on same port. Thanksg frost KF9WV From [EMAIL PROTECTED] Wed Aug 24 19:12:02 2005 From: [EMAIL PROTECTED] (Terry Ashland) Date: Fri Aug 26 10:43:15 2005 Subject: [Dx4win] filter selection 746Pro Message-ID: <[EMAIL PROTECTED]>
Hi, I have been using DX4Win 6.04 for quite a while with my IC-746Pro. It works great when clicking on spots, and following the rig when I change bands. It sets up splits properly also. However, I notice whenever I do click on a spot, it will switch to the proper mode, but it alwasys defaults to the second filter. Is there something in the rig file that controls that? I am using the 746 rig file with an address of 66, and baud rate of 19,200. I'm using Com 1 and rts is high. Any help would be appreciated. Has anyone created a specific 746Pro rig file? 73, Terry, WK0F From [EMAIL PROTECTED] Fri Aug 26 17:46:09 2005 From: [EMAIL PROTECTED] (Dimitriy Borzenko) Date: Sat Aug 27 10:52:15 2005 Subject: [Dx4win] BV7 and dx4win Message-ID: <[EMAIL PROTECTED]> Hello list. Anybody have experience with BV7? 1. I'm exporting my Dx4win log to ADIF for BV7 2. Printing on QSL's and mark QSO's - QSL received. 3. Export from BV7 to ADIF 4. From Dx4win importing ADIF file with option "Imported QSO sets Conf. flag" I got message "2259 confirmed QSOs were not found in the log" - why ? Best regards de 4z5cp
