Just tested this ; I reassigned all my logs to another group , but zero. now, doing F8, and selecting group 0 shows no QSO's.
Then that makes my first note correct - there must be a bug that means DX4WIN can't select groups when printing QSL's for Group zero All other groups work ok, where group names are entered Dave G3NKC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jim Reisert AD1C Sent: 27 January 2005 03:20 To: [EMAIL PROTECTED]; [email protected] Subject: RE: [Dx4win] Group numbers Les, I think I mis-spoke. You are right. At 09:40 AM 1/26/2005, Les Kalmus wrote: >Doing a search using F8 and group 0 gets me only the QSOs assigned to group >0 which is what I would expect. I used 0 for all the QSOs with my original >call. I have changed that group name to K2SHL. >If 0 = all QSOs, then shouldn't I get them all in that search? >Is there something I'm missing? > >73, Les W2LK > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Jim Reisert AD1C >Sent: Tuesday, January 25, 2005 5:08 PM >To: [email protected] >Subject: Re: [Dx4win] Group numbers > > >There are three reserved group numbers in DX4WIN: > > 0 = all QSOs >254 = QRP >255 = YL > >I may have the last two reversed. -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
