Sorry guys but i still have the problem. I'm running a TS2000X controlled by the ARCP software. (dx4win is not engaged to control the radio being the ARCP much more versatile than dx4win on this regard) The band and /or mode change any time I receive a spot via the cluster and it drive me creazy tring to run the contest or even searching and pounching on the band. Each time I must check that all is ok. Some time after having properly set the mode, tring to set the band, receiving a spot I must return to set again the band. I am starting to be boried by this problem. Have I missed some point? Tibor, IK2SAI
-----Messaggio originale----- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Richard Eckman Inviato: sabato 28 maggio 2005 5.06 A: [email protected] Oggetto: [Dx4win] Again: Adding QSOs in real-time Steve, Thanks for the clarification on this issue. I did some more experimenting with the 7.01 demo and you're correct: the band/mode is consistent with the rig setting in the "Add real time" mode when connected to the rig and the packetcluster is active. I did have to reset the poll rate to something a bit faster than 5 sec to get the info to display consistently in a rapid manner. My apologies for assuming that this band/mode issue was still as it was in 6.04. Regards, Rich Eckman KO4MR _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
