Mark,

Although DX4WIN will not auto-connect to a telnet connection, you can modify 
the DX4WIN.TCP file to life nicer. Using "Notepad" (or any other text 
editor), open the file and put your favorite cluster site(s) at the top. 
Then, when the <Select Internet address> dialog box opens, the cursor will 
be positioned on your favorite site and you only have to press the <Enter> 
key to proceed.

The first three lines of my TCP file look like this -- I added underscores 
in line 3 to make my two favorites even more obvious in the TCP list.
"
K8SMC>Jackson-MI,198.109.212.235
K8NA>Troy-MI,k8na.com
__
"

-larry
K8UT
----- Original Message ----- 
From: "M. Fitz" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, November 19, 2005 22:59
Subject: [Dx4win] Internet / Cluster - Telnet selection setup



   Hi=ll,

   Can  I  have  DX4Win save the address= use most often for Internet /
   Telnet
   connection?  Would  like  to  be=able  to have dx4win connect to the
   cluster
   on  startup.  I  realize  I=would  have  to be dialed up and already
   connected to
   the internet.

   Oh  and  I noticed if one isn't setup when=ou click connect, a small
   box comes up with
   message -> No=onnection active. Should I happen to change my mind at
   this
   point  and=lick cancel or close, I end up in a loop and have to exit
   dx4win via
   task-manager in WinXP. If I click .. say close, I get a box that reads
   -=n exception
   occurred.  I  click  OK on that error message box and get=nother box
   that reads - The
   destination  address  is  required.  I=lick OK and get the other box
   back again. This is
   a loop.


   Thanks



   Mark - ve9ts

   --
_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win 
From [EMAIL PROTECTED]  Tue Nov 22 07:25:30 2005
From: [EMAIL PROTECTED] (M. Fitz)
Date: Tue Nov 22 07:25:15 2005
Subject: [Dx4win] DX4WIN Cluster Info ...
Message-ID: <[EMAIL PROTECTED]>


    I   at the top. All is   Thanks  .. to all who helped me out with


   Mark - ve9ts

   --
From [EMAIL PROTECTED]  Tue Nov 22 07:41:31 2005
From: [EMAIL PROTECTED] (=?windows-1250?Q?Milan_G=FCtter=2C_OK1FM?=)
Date: Tue Nov 22 07:41:56 2005
Subject: [Dx4win] Help on a filter ??
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>

Bill,

small specification to this:

Search with filter F8 all PSK31 QSOs.
Export (File / Import Export) this only PSK31 QSO as adif file
(ok1fm_psk31.adi)
Open new empty log (File / New) ok1fm_psk31.dxl
Import ok1fm_psk31.adi

You will have PSK31 QSO log only

Use same way for SSTV QSOs or others.

73!

Milan, OK1FM
http://www.ok1fm.com
[EMAIL PROTECTED]




>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Milan Gütter, OK1FM
>Sent: Sunday, November 20, 2005 11:40 PM
>To: [EMAIL PROTECTED]; [email protected]
>Subject: RE: [Dx4win] Help on a filter ??
>
>
>Bill,
>
>You can use this way:
>
>Search with filter F8 all PSK31 QSOs.
>Save this only PSK31 QSO as new file (ok1fm_psk31.dxl)
>
>Then open this ok1fm_psk31.dxl log.
>
>Same way for SSTV QSOs.
>
>
>73!
>
>Milan, OK1FM
>http://www.ok1fm.com
>[EMAIL PROTECTED]
>
>
>
>
>
>
>
>
>>-----Original Message-----
>>From: [EMAIL PROTECTED]
>>[mailto:[EMAIL PROTECTED] Behalf Of Bill Clark
>>Sent: Sunday, November 20, 2005 10:46 PM
>>To: [email protected]
>>Subject: [Dx4win] Help on a filter ??
>>
>>
>>
>>Anyone know a way to set up a filter in Dx4win to search for psk31
>>contacts and only count an individual country once, like a DXCC count?
>>Since the psk counts as rtty I don't know of a way without some
>>special search scheme.Any help appreciated.
>>73  Bill-W5VW
>>
>>_______________________________________________
>>No banners. No pop-ups. No kidding.
>>Make My Way  your home on the Web - http://www.myway.com
>>
>>
>>_______________________________________________
>>Dx4win mailing list
>>[email protected]
>>http://mailman.qth.net/mailman/listinfo/dx4win
>>--
>>Pøíchozí zpráva neobsahuje viry.
>>Zkontrolováno Antivirovým systémem AVG.
>>Verze: 7.1.362 / Virová báze: 267.13.4/176 - datum vydání: 20.11.2005
>>
>
>_______________________________________________
>Dx4win mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dx4win
>--
>Pøíchozí zpráva neobsahuje viry.
>Zkontrolováno Antivirovým systémem AVG.
>Verze: 7.1.362 / Virová báze: 267.13.4/176 - datum vydání: 20.11.2005
>

Reply via email to