In a message dated 11/25/2005 11:07:24 P.M. Eastern Standard Time, Lfelker writes:
OK. Here's how to set up your first group >From menu across top of qso window, click Filter Then click Edit Group names This will bring up the group names window Highlight the number you want to label (eg., 001) then, in box at bottom enter Label (eg., home qth) Click "change" Click "OK" This will give u group 001 as "home qth" To make sure that your next, and subsequent, qso is identified as this group Click "File" on top menu bar Then click "preferences" select qso tab and find the "group" box on the top row change the group number to 001 click "file" on top menu bar click "save changes and exit" your done Follow same procedure to enter other groups Do you need help in changing group numbers of specific qso's Lex N4LF From [EMAIL PROTECTED] Sat Nov 26 16:29:48 2005 From: [EMAIL PROTECTED] (Anthony R Gargano N2SS) Date: Sat Nov 26 16:30:44 2005 Subject: [Dx4win] Re: DX4WIN and RigExpert Crashing System In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> That hotfix was for WINXP pre Service Pack 2. Service Pack 2 includes the fix and I am running XP with SP2. My problem is still there. No problem to control the radio with DX4WIN through the RigExpert interface. If I set the Com port up for keying through DX4WIN I can send CW but I crash the computer when I use DX4WIN to either "Start" or "Stop" the radio. If I set up DX4WIN for LPT keying I do not have the crashing problem. So, there's definitely something DX4WIN doesn't like about this Com port setup. I'm really scratching my head over this one. Anyone else have any thoughts? Thanks, Tony N2SS At 04:02 AM 11/26/2005, you wrote: >From: "M. Fitz" <[EMAIL PROTECTED]> >Precedence: list >Subject: [Dx4win] DX4WIN and RigExpert Crashing System ... >Date: Fri, 25 Nov 2005 07:38:43 -0400 >To: <[email protected]> >In-Reply-To: <[EMAIL PROTECTED]> >Message-ID: <[EMAIL PROTECTED]> >Content-Type: text/plain; charset="us-ascii" >MIME-Version: 1.0 >Message: 1 > > >DX4WIN and RigExpert Crashing System ... > > >Message: 2 I am using DX4WIN version 7.01 in conjunction with a > RigExpert interface box. > >I can get to the point of rig control and CW keying and sending, but if > I click on Radio "Stop" > >or Radio "Start" my WinXP PC crashes and the Blue Screen indicates >the > file ks.sys as the > >culprit. I have tried various configuration set-ups both in DX4WIN and > the RigExpert interface > >box driver >but >always with the same crashing problem. I had read > somewhere that DX4WIN > >is not friendly towards Com port CW keying. >Is >this my problem? Or am > I missing something > >in the configuration setups? Any suggestions would be greatly > appreciated. >Thanks, Tony N2SS > >What kind of PC are using? I diid some looking around concerning ks.sys. >There is a common blue screen error with ks.sys with Computers with >Intel Hyper-Threading CPU. Microsoft is aware of this problem and created >a hotfix, so you might check out the article and see if this fix might >help you? >I've added the link below. >http://support.microsoft.com/default.aspx?scid=kb;en-us;812035 > > >73 & GL Mark - ve9ts
