I am using DX4WIN 7.01 on a W98 machine. I cannot key the transmitter when using psk. I have no problem with the set up in Digipan (settings COM2 with both RTS and DTR checked as PTT). Works FB. BTW, radio control is via COM6 on both Digipan and DX4WIN which works FB.
I have tried many combinations of COMs and DTR/RTS assignments in the CONTROL tab of the preference screen. The help screen describes only a 25 ping DB and I am using a 9 pin DB on my laptop. Radio control via COM6 uses DTR as High and RTS as High. Can anyone tell me what settings I need to make this thing work? Tnx Calvin N9KO From [EMAIL PROTECTED] Tue Jan 24 07:22:13 2006 From: [EMAIL PROTECTED] (David McAulay) Date: Tue Jan 24 07:28:36 2006 Subject: [Dx4win] Any info appreciated pse Message-ID: <[EMAIL PROTECTED]> Any info appreciated please. Hi all I have a ft1000mp and using dx4win ver 4.07 (no need for all the new stuff as im only a ssb and cw op) I have the radio hooked up to the computer and the CAT in the radio works very well im also connected to the cluster system via telnet within dx4win I see a spot i need and click on it.... the radio qsy's ok except when i use cw on 40, 80, and 160mx bands the radio changes freq all ok but instead of the FT1000mp displaying CW-LSB it reads CW-USB in other words im on the "reverse CW mode" if that makes sense.??? Any suggestions please on how i might fix this.. AND MAKE THE RADIO DEFAULT TO THE CORRECT MODE.? Thank you David VK3EW
