--- Tom LeClerc W1TJL <[EMAIL PROTECTED]> wrote: > And here's a question I could not find an answer to in the groups > documentation - How do I set a particular group to be the default > group when DX4Win starts up?? When I start up it defaults to group 0 > (all contacts) but what I really want is for it to default to Group 1 > (US Contacts). Any ideas??
DX4WIN can't do this. Maybe Paul will add it to his list. Even just opening up the same group that was open last time would be an improvement. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Thu Jun 1 14:55:12 2006 From: [EMAIL PROTECTED] (Dick Flanagan K7VC) Date: Thu Jun 1 15:01:21 2006 Subject: [Dx4win] Combining Logs In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I use group numbers to both differentiate between callsigns and contests. My earlier callsign defaulted to Group 0 and various contests were Groups 1, 2, 3, etc. up to about 17 when I changed callsigns. I then chose to use 20 as the default for my new callsign and now contests start from there, 21, 22, 23, etc. YMMV, but it has worked well for me. 73, Dick At 11:40 AM 6/1/2006, Darrell Earnshaw wrote: >While I don't think that was the original intent of the group number, it can >easily be used for that purpose. I used it that way for a number of years: > >G4MZF/W4 (VA) - Group 1 >NR3Y (VA): Group 2 >NR3Y (CA): Group 3 > >This allowed me to separate reports - all entries (Group 0) for DXCC and yet >ability to select VA versus CA for WAS awards. Now I use date filters to >segment the log instead, which I think is a better approach. It also frees >up the Group numbers for other uses, such as contest identifiers. > >73, Darrell
